NEW Atomlab™ Wipe Test Counter

NEW Atomlab™ Wipe Test Counter
NEW Atomlab™ Wipe Test Counter
An extensive selection of quality assurance applications streamlines and simplifies hot lab administration requirements.
OverviewFeaturesApplicationsSpecificationsManualsModels and Ordering


No Cost Training at Your DesktopEasy to use, easy to understand.

The Atomlab® Wipe Test Counter is easy to use, easy to understand, fast and dependable. A  touchscreen display utilizing intuitive software eliminates the tedium of wipe testing. Simply perform a daily calibration and background count, then count the wipe for each predetermined location. Trigger levels can be set for any isotope at any location including 200 dpm for iodine. In seconds the system will determine if the location is above or below the user defined trigger level.

When performing a wipe test, the full spectrum is displayed. A wide window that includes the isotope energies expected in a particular department is set by the user. The efficiencies of the isotopes selected for the window can be either factory defaults or user determined using an integrated detector efficiency program. Individual isotope ROIs along with the wide window can be set. This feature helps identify the isotope(s) causing contamination.

The user may define an unlimited number of “Area” names and wipe “Locations” and designate them as restricted area, unrestricted area, sealed source or package. The Wipe Test Program automatically calculates net contamination levels and reports results in dpm, uCi and Bq.

The system consists of a lead shielded 2" x 2" sodium iodide (NaI) well detector and a 64 channel multichannel analyzer. The displayed energy range (spectrum) is 0-800 KeV, which is typically found in nuclear medicine departments.

The wipe counter is designed to meet or exceed all NRC (10 CFR 35.70, 10 CFR 20.1906 and 10 CFR 35.2067) and state wipe test requirements. There are automated programs for the quality assurance functions: calibration, FWHM, chi-square and minimum detectable activity (MDA).

Wipe test results and QA test data can be stored in memory and printed at any time.

Manual MCA Program
For performing sample counts and analysis beyond the scope of the standardized programs.

  • Expandable library of 33 commonly used isotopes
  • Unlimited user-defined isotopes
  • Two counting methods: preset time and preset ROI counts

In addition to providing “standardized” programs for routine test and survey procedures, the Atomlab Wipe Test Counter now offers a “manual” program to accommodate other counting and spectrum analysis tasks. The user can select from two counting methods: preset time and preset ROI counts. After any count, the Spectrum Analysis option can be used to produce a Spectrum Analysis Report. The monitor shows when a test is in progress, and graphically displays the spectrum, time, counts and cpm.


Eliminate the tedium of wipe testing with the Atomlab™ Wipe Test Counter

  • Windows® 10 Operating System
  • Microsoft SQL Database
  • Communicates with most commercially available NM management systems.
  • USB connectivity for external monitor, printer, and software upgrades
  • 64 Channel MCA
  • NEW Manual MCA Program
  • Expandable library of 33 commonly used isotopes
  • Adjustable wide window and individual isotopes
  • 2x2 NaI drilled-well detector
  • Remote shielded well
  • Energy spectrums with individual ROI
  • Ability to help identify isotopes causing contamination
  • User-specific wipe locations and trigger levels
  • Wipes that exceed trigger levels are immediately recognized
  • Detailed wipe reports including cpm and dpm
  • Wipe testing results stored
  • Upgradable at any time to a dose calibrator by adding an ionization chamber
  • Report Printer available
  • Two-year warranty



Dose App icon

Standard Apps for Atomlab Wipe Test Counter include:

  • Automated Quality Assurance Apps
    - Full Width at Half Max (FWHM)
    - Chi Square
    - Minimum Detectable Activity (MDA)
    - NEW Manual MCA Program
    - Expandable library of 33 commonly used isotopes



  • All-In-One Flat Panel Touchscreen Display with Windows 10 Operating System and USB connectivity.
  • Auxiliary Ports: USB, RS-232 and Ethernet
  • Memory: Stores wipe, calibration, background, high voltage, isotope specification, isotope efficiency, Chi-Square testing results, technologist list, wipe locations list and latest MDA calculation. Results can be displayed and printed.
  • Preset Radionuclides: 33 including Tc-99m, Co-57, Cs-137, Ga-67, Tl-201, I-123, I-125, I-131, In-111, F-18

Well Counter

  • Dimensions: 6" dia x 11" h (15.24 x 27.9 cm)
  • Weight: 29 lb (13.2 kg)
  • Detector: 2" x 2" NaI (Tl) integral line scintillation detector with a 0.75" dia x 1.44" depth well (1.9 x 3.7 cm)
  • Style: Remote Detector
  • Channels: 64
  • MCA: Integral to Well Counter
  • Spectral Resolution: FWHM 10%
  • Count Rate: (Maximum) 30,000 cps
  • Lead Shielding: 0.5" thick (1.2 cm) integral lead shield    
  • Certification: ETL listed to UL 60601-1 and CAN/CSA C22.2 No. 601.1.M90, IEC 60601-1, IEC 60601-1-4 and IEC 60601-1-2 and CE marked
  • Warranty: Two years parts and labor


CE Logo  ETL Logo  Windows 10


Models and Ordering

To order, call 1-800-224-6339

086-331 Atomlab™ Wipe Test Counter
Includes: Smart Display, well counter and RS-232 port.


086-336 Chamber, Dose Calibrator  $6,500.00
086-339 Printer, Ink Jet (report) 265.00
086-334 Cable, European to Wall Outlet 30.00
063-139 Rod Source, Cs-137, Calibrated, 0.1 µCi 365.00
075-596 Lead Shield, Wipe Test Chamber 600.00
006-350 Wipe Test Kits, 500/pkg 92.00
086-342 Well Liners, Disposable, 100/pkg 35.00
086-348 Adapter, USB 3.0 to Ethernet LAN Network
For connection to nuclear medicine management system
086-349 Cable, Mini-DIN to RS232 DB9 Adapter
For connection to nuclear medicine management system

Request More Information
Conditions of Purchase

Biodex Medical System, Inc.

(800) 224-6339

Request Information

Download Nuclear Medicine Catalog

Visit Biodex on YouTube

Software Integration

What They Are Saying
ec2 Software Solutions
Vice President
Brett Whittacre

It’s All Here… Greater Accuracy, Speed, Integration and Real-Time Inventory!

In The News

Biodex Unveils Next Generation Atomlab 500 Dose Calibrator & Wipe Test Counter

Leader in nuclear medicine and molecular imaging solutions releases their latest Atomlab line with a sleek new design, enhanced user experience, and improved connectivity for the modern technologist or radiopharmacy. Featuring the intuitive functionality and superior accuracy Biodex products are known for, the new Atomlab Dose Calibrator and Wipe Test Counter add integration features that ensure longer life (or half-life) to the user.


This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

Read More