The Xenon Trap Monitor is the perfect complement to the Pulmonex II™ Xenon System to ensure a safe environment.The unit continuously monitors trap effluent during a xenon study via an exhaust hose connection from the Pulmonex II exhaust port to the monitor's intake port.

The Xenon Trap Monitor is simple to operate; all controls are located on the front panel. Counting results are displayed every minute with both audible and visual signals to indicate when Xenon levels are above or below the user set threshold. The unit can also check background levels and perform a self-test for proper operation using a check source.

The Xenon Trap Monitor includes all the hardware necessary to mount the unit directly to the Pulmonex II Xenon System.

*Exclusively distributed by Biodex.

Specifications

• Dimensions: 6" w x 7" l x 4" h (15.2 x 17.8 x 10.2 cm)
• Lead Shielding: .5" thick (1.3 cm)
• Input: 22 mm Hose Adapter
• Detector: Halogen Quenched GM Tube, 1.1 cm dia, 2 mg/cm2 mica window
  - Voltage: 500 volts regulated
• Buttons: Background, Test, Count, Reset, Display Test, Data Entry Mode, Threshold and Up and Down for Threshold
• Display: 4 Digit LED
• Readings: pCi/ml
• Speaker: Internal, beeps when displays result
• Background Count Time: 20 minutes
• Power: 18 volts, UL approved, external; 115 VAC Power Adapter
• Weight: 4.5 lb (2.1 kg)

136-752 Xenon Trap Monitor Mounts to Pulmonex II Xenon Systems $2,995.00

Related:

101-103 Check Source, Cs-137, 10 µCi (uncalibrated), 1" dia x .25" thick (2.5 x .64 cm) $140.00