The XenonVAP™ Administration System is an inexpensive,
disposable device used to administer Xenon-133 nd to collect the
expired gas on ventilator-assisted patients. The system accommodates
any standard tracheotomy tube (15 mm I.D.).
The ventilator-assisted patient is removed from their regular device and placed
on this system for short term ventilator assistance during the procedure. The
patient's breathing is first stabilized and then Xe-133 is injected into the
system. The VAP is squeezed and held until sufficient counts are collected by
the gamma camera system or until the patient must breathe. The pump is squeezed
and released, forcing the patient to breathe through the system to collect an "equilibrium
phase" image. When sufficient data has been collected, the valve is opened
and the patient breathes room air and Xe-133 is eliminated into a collection
bag. The gamma camera system should immediately begin collecting data for the "washout
phase" image.
When the study is complete, the entire rebreathing
system is disposed of in accordance with NRC regulations.
- Ventilator-Assist Pump (VAP) with 2037 cc volume
capacity
- Endotrachial Tube Connection (15 mm I.D.) accommodates
standard tracheotomy tube
- Injection Site for administration of Xe-133
- Oxygen Inlet to collection bag
- CO2 Absorber (pre-filled with Soda-Lime and
dust filter)
- 35-liter Collection Bag
 |
 |
060-139
 |
Administration
System, XenonVAP™ |
$75.00 |
|
 |
Conditions of Purchase | |

|