| Eliminate the tedium of wipe testing with
the Atomlab™ Wipe Test Counter
- Easy-to-use, large touch screen with intuitive menus
- Meets NRC/State regulations
- 64 Channel MCA
- Adjustable wide window and individual isotopes
- 2x2 NaI drilled-well detector
- Remote shielded well
- Energy spectrums with individual ROI
- Ability to help identify isotopes causing contamination
- User-specific wipe locations and trigger levels
- Wipes that exceed trigger levels are immediately
recognized: flashes on screen and prints in red
- Detailed wipe reports including CPM and DPM
- Automated QA testing, Chi square, FWHM and MDA
- Wipe testing results stored
- Upgradable at any time to a dose calibrator by adding an ionization chamber
- Optional printer for hard-copy archives
- Two-year warranty
- RS-232 bi-directional serial communications port
Finally, a wipe test counter that’s easy to use, easy to
understand, fast and dependable. A color touch-screen
display utilizing intuitive software eliminates the tedium of
wipe testing. Simply perform a daily calibration and
background count, then count the wipe for each
predetermined location. Trigger levels can be set for any
isotope at any location including 200 dpm for iodine. In
seconds the system will determine if the location is above or
below the user defined trigger level.
When performing a wipe
test, the full spectrum is
displayed. A wide
window that includes the
isotope energies expected
in a particular
department is set by the
user. The efficiencies of
the isotopes selected for
the window can be either
factory defaults or user
determined using an
integrated detector
efficiency program. Individual isotope ROIs
along with the wide
window can be set.
This feature helps
identify the isotope(s)
causing contamination.
Up to 50 wipe locations can be entered as a restricted area,
unrestricted area, sealed source or package. The results are
displayed in dpm, cpm, μCi or kBq.
The system consists of a lead shielded 2" x 2" sodium iodide
(NaI) well detector and a 64 channel multi-channel analyzer.
The displayed energy range (spectrum) is 0-800 KeV, which
is typically found in nuclear medicine departments.
The wipe counter is designed to meet or exceed all NRC (10
CFR 35.70, 10 CFR 20.1906 and 10 CFR 35.2067) and
state wipe test requirements. There are automated programs
for the quality assurance functions: calibration, FWHM,
chi-square and minimum detectable activity (MDA).
Wipe test results and QA test data can be stored in memory
and printed at any time.
DISPLAY
- Display: LCD Touch Panel 6.5" x 5", function keys are displayed for the operation
being performed
- Connectors: RJ-12 for well cable, USB for printer
- Power: This system uses XP Power Supply for medical use, Model #PDM60US15
- Line Voltage: 100 to 240 VAC, auto selectable by the power supply, 1.5 – 0.75 amps
- Line Frequency: 50/60 Hz, detachable line cord, built-in EMI filter and
transient suppression
- Auxiliary Port: RS-232 connector, used for data export and firmware updates
- Memory: Stores wipe, calibration, background, high voltage, isotope specification,
isotope efficiency, Chi-Square testing results, technologist list, wipe locations list and
latest MDA calculation. Results can be displayed and printed.
- Preset Radionuclides: 27 including Tc-99m, Co-57, Cs-137, Ga-67, Tl-201,
I-123, I-125, I-131, In-111, F-18
DETECTOR CABLE
- Length: Standard 8 ft. (243 cm); custom cable lengths available up to 20 meters
- Conductors: Six total – 2 for power, two for chassis ground, two for serial data
- Connectors: RJ-12
WELL COUNTER
- Detector: 2" x 2" NaI (Tl) integral line scintillation detector with a
0.75" dia x 1.44 " depth well (1.9 x 3.7 cm)
- Style: Remote Detector
- Channels: 64
- MCA: Integral to Well Counter
- Spectral Resolution: FWHM 10%
- Count Rate: (Maximum) 30,000 cps
- Connectors: RJ-12 for power and signal
- Lead Shielding: 0.5" (1.2 cm) integral lead shield
- Optional Calibration Source: 0.1 μCi Cs-137 Rod Source
- Optional Additional Shield: 0.5" (1.2 cm) lead shield, slides over integral shield
for total of 1.0" of shielding – includes cover
- Cover: Fits optional additional lead shield, has 0.25" (.6 cm) lead shielding
PHYSICAL DATA
Display Unit:
- Size: 9.5" w x 12" h x 12" d (24.1 x 30.5 x 30.5 cm)
- Weight: 4.2 lb (1.9 kg)
Well Counter
- Size: 6" d x 11" h (15.24 x 27.9 cm)
- Weight: 29 lb (3.2 kg)
Approvals: ETL listed to UL 60601-1 and CAN/CSA C22.2 No. 601-1M90,
IEC 60601-1, IEC 60601-1-4 and IEC 60601-1-2
086-331
Warranty: Two Year
 |
|
| 086-331 |
Atomlab™Wipe Test Counter
Includes: smart display, well counter and RS-232 port. |
$3,995.00 |
|
|
Related:
An industry exclusive two-year warranty is standard.
|
|
Finally, a wipe test counter
that’s easy to use, easy to
understand, fast and dependable.
|
