Xenon Disposables

Choose the components to assemble your own "kit".

All of our xenon disposables were designed for use with the Pulmonex Xenon System. The most popular disposable combinations have been packaged together as Xenon Convenience Kits™, however, all components are available separately.

Component Disposables

Soft, Leak-Proof, Comfortable
Our Air-Cushioned Face Mask molds to the contour of the patient's face, providing a tight, leak-proof and comfortable seal. Cushion pressure is shipped at medium inflation and is easily adjusted as needed. Simply attach a syringe (without a needle) to inflate or deflate mask.

Choose the components to assemble your own "kit". 

Air-Cushioned Face Mask with Direct Dose Administration

In addition to the patient comfort provided by the soft, pliable air cushion of the disposable face mask, the direct dose feature reduces patient anxiety because no needle is used. The syringe luer locks tightly to the direct dose tube, away from the patient's face. The one-way valve prevents the gas from reversing through the mask luer connector, allowing the technologist to disconnect immediately after injecting.

Air-Cushioned Face Mask without Injection Port

The air-cushioned face mask has a pre-filled air-cushion (medium inflation pressure) that molds to the contour of the patient's face providing a tight, leak-proof and comfortable seal. Cushion pressure is easily adjusted by inserting a standard syringe without needle in the two-way valve located on the mask bottom. The flexibility of cushion pressure allows optimum surface contact for every patient. Transparency of the entire mask allows continuous visual identification of patient's vital signs.

Air-Cushioned Face Mask with Injection Port

The air-cushioned face mask has a pre-filled air-cushion (medium inflation pressure) that molds to the contour of the patient's face providing a tight, leak-proof and comfortable seal. Cushion pressure is easily adjusted by inserting a standard syringe without needle in the two-way valve located on the mask bottom. The flexibility of cushion pressure allows optimum surface contact for every patient. Transparency of the entire mask allows continuous visual identification of patient's vital signs.

Face Mask Harness

This traditional face mask harness is made of soft rubber and can be adjusted for any head size. The square rubber base is comfortably positioned on the back of the patient's head and the harness tails are brought around to the front. The small holes fit snugly on the hook ring and hold the mask firmly in place.

Tru-Fit Disposable Mouthpiece

Contoured to the natural shape of the mouth, this mouthpiece can be held gently, but securely — eliminating the need to clamp down or the possibility of "popping" out of the patient's mouth and interrupting the study. The soft plastic material is transparent so that any obstruction can be immediately detected by the technologist. Pleasantly scented with vanilla, this mouthpiece makes the procedure a little more comfortable for the patient.

Disposable Nose Clip

Economical, this nose clamp is all plastic for single patient use. Used with any mouthpiece.

Disposable Bacteria Filter

Bacteria filters are used to reduce the possibility of cross contamination. The single-use filter is placed in line between a delivery tube and disposable mouthpiece or face mask. Electrostatically charged filter media is 99.9% effective in bacteria/virus retention while maintaining low breathing resistance. Two filters can be piggy-backed together for potential high-risk studies.

Drierite, Moisture absorber - new blue and white blend

Drierite serves as a moisture trap for the air going into the charcoal trap of the Pulmonex Xenon System. Drie­rite is blue and white when dry and turns pink when it has absorbed maximum moisture. Available in two convenient sizes, Drie­rite is packaged in an air-tight container with a wide-access mouth.

Soda-Lime, CO2 Absorber

Soda-Lime, a highly efficient CO2 absorber, prevents patients from rebreathing carbon dioxide and subsequent acidosis. Available in two convenient sizes, Soda-Lime is packaged in an air-tight container with a wide access mouth.

Corrugated Tubing

Corrugated Tubing is scored and capped at 6" intervals for easy cutting and firm attachment to fittings.

Tubing Splice

Tubing Splice is used to connect sections of 22 mm corrugated tubing to individual mask and filter.

"Y" Connector

The "Y" Connector has a one-way valve and plug. It is used to connect two 22 mm tubes to a mouthpiece, face mask or bacteria filter.