- Low attenuation carbon fiber tabletop, with innovative contour design
- High-speed actuators assure quick, three axis motorized tabletop positioning
- Convenient positioning controllers
- Smooth starts and stops programmed into all motorized movements
- 500-lb patient capacity
- Face cutout for comfortable prone positioning
- Low profile base for C-Arm clearance
- Accessory rails
Featuring a large radiolucent area, motorized actuation
of height, lateral roll and Trendelenburg motions, the 870 is ideal
for pain care applications.
Accommodates portable or ceiling-suspended C-Arms
Designed for procedures where stability, access,
and precise, quiet, vibration-free positioning are essential, the
Pain Management C-Arm Table is excellent for image-guided procedures.
A cantilevered low attenuation carbon fiber tabletop accommodates
portable or ceiling-suspended C-Arms. The radiolucent area is free
of cross members, allowing full fluoroscopic visualization and unobstructed
C-Arm positioning. Functional design provides complete access with
reduced radiation exposure to clinicians. Patient comfort and stability
are assured by two-inch thick table padding and three adjustable
straps with Velcro® hook and loop fastening. A face cutout is
provided for prone positioning.
- Dimensions: 93" l x 26" w (233 x 66 cm)
with OR accessory rails
- Tabletop: 90" l x 24" w (228.6 x 61 cm)
- Radiolucent Area:
- 60" l x 24" w (152.4 x 61 cm) unobstructed head to
accessory rail
- 4" l x 17.5" w (10.1 x 44 cm) additional, between
accessory rails
- Radiolucent Area, Total Length: 64" l (160 cm)
- Tabletop Material: Carbon fiber with integral head section
- Mattress: 2" thick (5 cm)
- Attenuation:
- Tabletop: .7 mm Aluminum equivalence
- Mattress: .5 mm Aluminum equivalence
- Motions:
- Height Adjustable: 30" to 40" (75 to 100 cm)
- Trendelenburg: 0° to 20°
- Reverse Trendelenburg: 0° to 20°
- Lateral Roll: 0° to 20°
- Controls:
- Hand Control: activates height, lateral roll and Trendelenburg
motions
- Optional:
- Foot Control: activates height, lateral roll and - Trendelenburg
motions
- Wheels:
- Head End – 3" (7.62 cm) swivel casters, integral
locking system on base
- Foot End – 5" (12.7 cm) swivel casters with central
locking
- Accessory Rails: Standard OR accessory rails 30" x 1.12"
x .375"
(75 x 2.86 x .95 cm) mounted near foot end of table
- Patient Restraints: Three body straps
- Finish: Powder coat
- Patient Capacity: 500 lb (227 kg); weight tested to four times
the patient load rating.
- Lift Capacity: May vary between 460 lb - 500 lb
(209-227 kg) based on line voltage
- Power: 115 VAC or 230 VAC
- Warranty: one year
- Certifications: ETL and cETL listed to UL-2601-1®, CAN/CSA© C22.2 No.: 601-1-M90,
EN 60601-1, IEC 60601-1-2
Which C-Arm Table is right for you?
Compare
 |
|
| 058-870 |
Table,
Pain Management C-Arm,
115 VAC |
$16,900.00 |
|
|
| 058-875 |
Table,
Pain Management C-Arm,
230 VAC |
16,900.00 |
|
|
Optional:
|
|
| 058-877 |
Controller, Foot |
$895.00 |
|
|
| 056-850 |
IV Pole, Rail
Mounted |
390.00 |
|
|
| 056-865 |
Arm Board, Carbon
Fiber, one arm |
600.00 |
|
|
| 056-866 |
Arm Board, Carbon
Fiber, two arms |
1,150.00 |
|
|
| 058-856 |
Radiation Shield, Head/Cervical |
$1,595.00 |
|
|
| 058-857 |
Radiation Shield, Thoracic/AB |
1,695.00 |
|
|
| 058-849 |
Clamp, Accessory, C-Arm Table |
$695.00 |
|
|
|
 |
|
| Hand-Held
Controller |
|
A portable hand-held controller and optional
foot-operated controller can be positioned for convenient
access from any point around the table. The portable hand-held
and optional foot-operated controllers offer the freedom
to adjust height, lateral roll, and Trendelenburg motions
from locations away from the table, or when hands are
busy with other functions. The hand-held controller hangs
on an accessory rail when not in use. |
|
| Innovative Contour Design Top: Biodex C-Arm tables
feature a uniquely contoured tabletop. This design fully accommodates
C-Arm positioning for closest possible access to the cervical
spine, achieving optimum image resolution. A second benefit
to the contour design is the added workspace at the head end,
while maintaining the narrowness required for cervical procedures.
|
As required by law, all Biodex
C-Arm tables are CDRH registered and FDA Device Listed. All
motorized tables are ETL product listed to the
UL-2601-1 Medical Electrical Equipment Safety Standard. |
 |
| |
|
Protect yourself from scatter radiation. Biodex offers maximum protection Scatter Radiation Shields, designed to fit all Biodex C-Arm tables. These shields are custom fitted to match the unique contours of the Biodex tabletop. Constructed of 0.5 mm lead equivalent panels, the shields do not impede C-Arm access.
There are two shields available. One is designed to be used at the head end of the table for head and cervical procedures. The other is used at the main section of the table during thoracic or abdominal procedures.
The shields are easy to add or remove as needed. There are no attachment parts necessary, no metal to obscure the image. The shields simply drape over the tabletop, beneath the mattress. Shields are purchased individually and may used in combination for total protection or for select region of interest.
|
 |
| |
|
The Biodex C-arm Table Accessory Clamp is designed to mount to all Biodex carbon fiber top C-arm tables. It is used to attach a table accessory, such as arm boards or fistula boards that require standard OR accessory railing. The clamp will accommodate any standard OR locking block, and can be placed anywhere along the length of the table to provide six inches of OR accessory rail.
|
|
